Description
The S-5-T is specifically designed for profiles featuring a T-shaped seam configuration. Easily install the two-piece design anywhere along the seam.
This non-penetrating, standing seam metal roof clamp can also be used on architectural single-fold or angle- seam profiles with a horizontal projection of 5/8 (15 mm) or less.
All S-5 clamps undergo rigorous load testing. Negative load normal-to-seam testing (pull-up) is performed on all Mini clamps, and parallel-to-seam testing (drag load) is performed on all standard clamps.
Additional Features
- For profiles with a T-shaped seam, with a horizontal dimension = 1.3”(33 mm)
- Fits single-fold(“angle-seam”), horizontal seam with a dimension = 5/8”(15 mm)
- Two-piece design allows clamp placement onto seam at any desired location
- Two T-30 Torx round-point setscrews (Torx bit tip provided)
- One M8 bolt included