Solar Rebates and Solar Tax Credits for Ohio

Qualifying air quality facilities, which can be financed through the OAQDA, include:

1. Projects that modify or replace property, processes, devices, equipment, or structures that removes (or otherwise reduces, stores) air pollution and air contaminants.

2. Any property used for the collection, storage, treatment, processing, or final disposal of solid waste resulting from an air pollution control process.

3. Any energy efficiency or conservation project.

4. Any project that uses renewable or biomass resources, including ethanol and other biofuel.

Note: The Inflation Reduction Act of 2022 (H.R. 5376) made several significant changes to this tax credit, including expanding the eligible technologies, extending the expiration date, modifying the scheduled step-down in its value, providing for new bonus credits, and establishing new criteria to qualify for the full credit. It also phases out this tax credit under section 48 of the Internal Revenue Code and replaces it with a new technology-neutral tax credit under section 48E of the Internal Revenue Code. The summary below describes the current section 48 tax credit as modified by the Inflation Reduction Act, and below that, the new 48E tax credit.   

The federal Business Energy Investment Tax Credit (ITC) has been amended a number of times, most recently and most significantly by the Inflation Reduction Act of 2022. That bill established new prevailing wage and apprenticeship requirements for larger system to qualify for the full 30% tax credit. The Department of the Treasury issued Initial Guidance on these requirements on November 30, 2022 . According to law, the labor provisions apply to projects for which construction begins 60 days or more after Treasury publishes its guidance. Given the publishing date of November 30, 2022, the effective date for the labor provisions is January 30, 2023. The credit for different project types and available bonus credits is described below.

Base Credit

Projects under 1 MW (or larger projects that are commenced no more than 60 days after the Treasury Secretary develops labor guidelines) do not need to meet the new labor standards established by the Inflation Reduction to receive the full 30% tax credit. Such projects that begin construction after 2021 and before 2025 can receive the full tax credit of 30%. Note, projects that commence construction on or after January 1, 2025 can receive a tax credits under the new Clean Electricity Investment Tax Credit (48E) described below. 

Projects over 1 MW that begin construction 60 days after the Treasury Secretary releases labor guidelines (January 29, 2023) and no later than January 1, 2025 will receive a base tax credit of 6%. However, projects can qualify for the full 30% tax credit if they ensure that all laborers and mechanics involved in the construction of the project or the maintenance of the project for 5 years after project completion are paid wages at rates not less than prevailing wages. Projects must also ensure that a percentage of total labor hours are performed by qualified apprentices. The percent of hours increases over time to a maximum requirement of 15% in 2024 and thereafter. Note, projects that commence construction on or after January 1, 2025 can receive a tax credits under the new Clean Electricity Investment Tax Credit (48E) described below. 

Bonus Credits

Projects in which 100% of any steel or iron that is a component of the facility and 40% of the manufactured products that are components of the facility were produced in the United States can qualify for the Domestic Content Bonus. for projects that are under 1 MW and projects that are larger than 1 MW and meet the labor requirements specified above, the Domestic Content Bonus increases the tax credit by 10 percentage points. For larger projects that do not meet the labor requirements, the Domestic Content Bonus increases the tax credit by 2 percentage points. 

Projects that are located within an energy community can receive the Energy Community Bonus. To qualify, a facility must be located at one of the following: (i) a brownfield site, (ii) a metropolitan or non-metropolitan statistical area which (A) has (or, at any time during the period beginning after December 31, 2009, had) 0.17% or greater direct employment or 25% or greater local tax revenues related to the extraction, processing, transport, or storage of coal, oil, or natural gas, or (B) has an unemployment rate above the national average for the previous year, or (iii) a census tract or a census tract that is adjoining a census tract in which a coal mine has closed after 1999 or a coal-fired electric generating unit was retired after 2009. For projects that are under 1 MW and projects that are larger than 1 MW and meet the labor requirements specified above, the Energy Community Bonus increases the tax credit by 10 percentage points. For larger projects that do not meet the labor requirements, the Energy Community Bonus increases the tax credit by 2 percentage points. 

Solar and wind facilities less than 5 MW may also be eligible for low-income bonuses. A project built in a low-income community as defined by the New Markets Tax Credit or on Indian Land can receive an increased tax credit of 10 percentage points. A project associated with a low-income residential building project or a low-income economic benefit project can receive an increased tax credit of 20 percentage points. 

Eligible Technologies

• Solar Technologies
• Fuel Cells
• Wind Turbines 
• Geothermal Systems
• Microturbines
• Combined Heat and Power (CHP)
• Offshore Wind
• Waste Energy Recovery. Qualified waste energy recovery property means property that generates electricity solely from heat from buildings or equipment if the primary purpose of such building or equipment is not the generation of electricity. The term “waste energy recovery property” does not include any property that has a capacity in excess of 50 megawatts.
• Energy Storage Systems, both paired with generation and installed as a stand-alone system
• Thermal Energy Storage Systems
• Qualified Biogas Property
• Microgrid Controllers
• Interconnection Property associated with the installation of energy property with a maximum net output of not greater than 5 MW-AC to provide for the transmission or distribution of the electricity produced or stored by such property, and which are properly chargeable to the capital account of the taxpayer.

Credit Monetization

Section 13801 of The Inflation Reduction Act of 2022 also established procedures for other parties to monetize certain tax credits, including this one, for equipment placed in service on or after January 1, 2023 and through December 31, 2032. 

The direct pay option allows non-taxable entities to directly monetize certain tax credits. The provisions apply to nonprofits, a state or political subdivision thereof, the Tennessee Valley Authority, Indian tribal governments (as defined in Section 30D(g)(9)), any Alaska Native Corporation (as defined in Section 3 of the Alaska Native Claims Settlement Act), or any corporation operating on a cooperative basis which is engaged in furnishing electric energy to persons in rural areas. Such applicable entities can elect to be treated as having made a tax payment equal to the value of the tax credit they would otherwise be eligible to claim. The entity can then claim a refund for the excess taxes they are deemed to have paid. The option effectively makes this tax credit refundable for these entities. 

The act also allows eligible taxpayers to transfer all or a portion of their eligible tax credits to an unrelated taxpayer. Transfers must be reported to IRS and only one transfer is permitted. Must be elected no later than the due date for tax filing for the tax year the tax credit is claimed.

Clean Electricity Investment Tax Credit (48E)

Section 13702 of the Inflation Reduction Act created a new tax credit, the Clean Electricity Investment Tax Credit to replace the traditional ITC for systems placed in service on or after January 1, 2025. The tax credit is functionally similar to the ITC, but is not technology-specific. It applies to all generation facilities and energy storage systems that have an anticipated greenhouse gas emissions rate of zero. The credit amount is generally calculated in the same manner as described above, but will be phased out as the U.S. meets greenhouse gas emission reduction targets. For a project whose construction is commenced in the year following the year in which greenhouse gas emissions from the production of electricity in the United States are equal to or less than 25% of the 2022 levels, the tax credit will not be reduced. However, for projects commenced in the second year following the target being met, the tax credit will be worth 75% of what it would otherwise be. Projects commenced in the third year will receive a credit worth 50%, and all projects commenced after then will not be eligible for a tax credit. 

According to Section 136 of the U.S. Code, energy conservation subsidies provided (directly or indirectly) to customers by public utilities* are non-taxable. This exclusion does not apply to electricity-generating systems registered as "qualifying facilities" under the Public Utility Regulatory Policies Act of 1978 (PURPA). If a taxpayer claims federal tax credits or deductions for the energy conservation property, the investment basis for the purpose of claiming the deduction or tax credit must be reduced by the value of the energy conservation subsidy (i.e., a taxpayer may not claim a tax credit for an expense that the taxpayer ultimately did not pay).

The term "energy conservation measure" includes installations or modifications primarily designed to reduce consumption of electricity or natural gas, or to improve the management of energy demand. Eligible dwelling units include houses, apartments, condominiums, mobile homes, boats and similar properties. If a building or structure contains both dwelling units and other units, any subsidy must be properly allocated.

The definition of "energy conservation measure" implies that utility rebates for residential solar-thermal projects and photovoltaic (PV) systems may be non-taxable. However, the IRS has not ruled definitively on this issue. Taxpayers considering using this provision for a renewable energy system should discuss the details of the project with a tax professional. Other types of utility subsidies that may come in the form of credits or reduced rates might also be non-taxable, according to IRS Publication 525.


* The term "public utility" is defined as an entity "engaged in the sale of electricity or natural gas to residential, commercial, or industrial customers for use by such customers." The term includes federal, state and local government entities.

Note: The Tax Cuts and Jobs Act of 2017 increased bonus depreciation to 100% for qualified property acquired and placed in service after September 27, 2017 and before January 1, 2023. 

Under the federal Modified Accelerated Cost-Recovery System (MACRS), businesses may recover investments in certain property through depreciation deductions. The MACRS establishes a set of class lives for various types of property, ranging from three to 50 years, over which the property may be depreciated. A number of renewable energy technologies are classified as five-year property (26 USC § 168(e)(3)(B)(vi)) under the MACRS, which refers to 26 USC § 48(a)(3)(A), often known as the energy investment tax credit or ITC to define eligible property. Such property currently includes*:

• a variety of solar-electric and solar-thermal technologies
• fuel cells and microturbines
• geothermal electric
• direct-use geothermal and geothermal heat pumps
• small wind (100 kW or less)
• combined heat and power (CHP)
• the provision which defines ITC technologies as eligible also adds the general term "wind" as an eligible technology, extending the five-year schedule to large wind facilities as well.

In addition, for certain other types of renewable energy property, such as biomass or marine and hydrokinetic property, the MACRS property class life is seven years. Eligible biomass property generally includes assets used in the conversion of biomass to heat or to a solid, liquid or gaseous fuel, and to equipment and structures used to receive, handle, collect and process biomass in a waterwall, combustion system, or refuse-derived fuel system to create hot water, gas, steam and electricity. Marine and hydrokinetic property includes facilities that utilize waves, tides, currents, free-flowing water, or differentials in ocean temperature to generate energy. It does not include traditional hydropower that uses dams, diversionary structures, or impoundments.

The 5-year schedule for most types of solar, geothermal, and wind property has been in place since 1986. The federal Energy Policy Act of 2005 (EPAct 2005) classified fuel cells, microturbines and solar hybrid lighting technologies as five-year property as well by adding them to § 48(a)(3)(A). This section was further expanded in October 2008 by the addition of geothermal heat pumps, combined heat and power, and small wind under The Energy Improvement and Extension Act of 2008.

Bonus Depreciation

Bonus Depreciation has been sporadically available at different levels during different years. Most recently, The Tax Cuts and Jobs Act of 2017 increased bonus depreciation to 100% for qualified property acquired and placed in service after September 27, 2017 and before January 1, 2023.

Bonus Depreciation History

The 50% first-year bonus depreciation provision enacted in 2008 was extended (retroactively for the entire 2009 tax year) under the same terms by the American Recovery and Reinvestment Act of 2009 (H.R. 1), enacted in February 2009. It was renewed again in September 2010 (retroactively for the entire 2010 tax year) by the Small Business Jobs Act of 2010 (H.R. 5297). In December 2010 the provision for bonus depreciation was amended and extended yet again by the Tax Relief, Unemployment Insurance Reauthorization, and Job Creation Act of 2010 (H.R. 4853). Under these amendments, eligible property placed in service after September 8, 2010 and before January 1, 2012 was permitted to qualify for 100% first-year bonus depreciation. The December 2010 amendments also permitted bonus depreciation to be claimed for property placed in service during 2012, but reverted the allowable amount from 100% to 50% of the eligible basis. The 50% first-year bonus depreciation allowance was further extended for property placed in service during 2013 by the American Taxpayer Relief Act of 2012 (H.R. 8, Sec. 331) in January 2013. The Tax Increase Prevention Act Of 2014 (H.R. 5771, Sec. 125), extended  these provisions through to December 31, 2014, and thus retroactively for the 2014 tax year.

For more information on the federal MACRS, see IRS Publication 946, IRS Form 4562: Depreciation and Amortization, and Instructions for Form 4562. The IRS web site provides a search mechanism for forms and publications. Enter the relevant form, publication name or number, and click "GO" to receive the requested form or publication. For guidance on bonus depreciation, including information relating to the election to claim either 50% or 100% bonus depreciation, retroactive elections to claim 50% bonus depreciation for property placed in service during 2010, and eligible property, please see IRS Rev. Proc. 2011-26.


*Note that the definitions of eligible technologies included in this entry are somewhat simplified versions of those contained in tax code, which often contain additional caveats, restrictions, and modifications. Those interested in this incentive should review the relevant sections of the code in detail prior to making business decisions.

According to Section 136 of the U.S. Code, energy conservation subsidies provided (directly or indirectly) to customers by public utilities* are non-taxable. This exclusion does not apply to electricity-generating systems registered as "qualifying facilities" under the Public Utility Regulatory Policies Act of 1978 (PURPA). If a taxpayer claims federal tax credits or deductions for the energy conservation property, the investment basis for the purpose of claiming the deduction or tax credit must be reduced by the value of the energy conservation subsidy (i.e., a taxpayer may not claim a tax credit for an expense that the taxpayer ultimately did not pay).

The term "energy conservation measure" includes installations or modifications primarily designed to reduce consumption of electricity or natural gas, or to improve the management of energy demand. Eligible dwelling units include houses, apartments, condominiums, mobile homes, boats and similar properties. If a building or structure contains both dwelling units and other units, any subsidy must be properly allocated.

The definition of "energy conservation measure" implies that utility rebates for residential solar-thermal projects and photovoltaic (PV) systems may be non-taxable. However, the IRS has not ruled definitively on this issue. Taxpayers considering using this provision for a renewable energy system should discuss the details of the project with a tax professional. Other types of utility subsidies that may come in the form of credits or reduced rates might also be non-taxable, according to IRS Publication 525. 


* The term "public utility" is defined as an entity "engaged in the sale of electricity or natural gas to residential, commercial, or industrial customers for use by such customers." The term includes federal, state and local government entities.

Note: The Inflation Reduction Act of 2022 (H.R. 5376) made several significant changes to this tax credit, including extending the expiration date, providing for new bonus credits, and establishing new criteria to qualify for the full credit. It also phases out this tax credit under section 45 of the Internal Revenue Code at the end of 2024 and replaces it with a new technology-neutral tax credit under section 45Y of the Internal Revenue Code. The summary below describes the current section 45 tax credit as modified by the Inflation Reduction Act, and below that, the new 45Y tax credit.   

The federal renewable electricity production tax credit (PTC) is an inflation-adjusted per-kilowatt-hour (kWh) tax credit for electricity generated by qualified energy resources and sold by the taxpayer to an unrelated person during the taxable year. The duration of the credit is 10 years after the date the facility is placed in service.

Originally enacted in 1992, the PTC has been renewed and expanded numerous times, most recently by the Inflation Reduction Act of 2022. That bill established new prevailing wage and apprenticeship requirements for larger system to qualify for the full value of the tax credit -- 2.6 cents per kilowatt-hour (kWh) for wind, closed-loop biomass, and geothermal energy; 1.3 cents per kWh for open-loop biomass facilities, small irrigation power facilities, landfill gas facilities and trash facilities. In late-2022 or 2023, the Treasury Secretary will issue guidance for these new labor provisions. The credit for different project types and available bonus credits is described below.

Base Credit

Projects under 1 MW (or larger projects that are commenced no more than 60 days after the Treasury Secretary develops labor guidelines) do not need to meet the new labor standards established by the Inflation Reduction to receive the full 1.3 or 2.6 cents/kWh (depending on the facility type) tax credit. This amount may be adjusted annually for inflation. Such projects that begin construction after 2021 and before 2025 can receive the full tax credit. Note, projects that commence construction on or after January 1, 2025 can receive a tax credit under the new Clean Energy Production Tax Credit (45Y) described below. 

Projects over 1 MW that begin construction 60 days after the Treasury Secretary releases labor guidelines and no later than January 1, 2025 will receive a base tax credit of 0.5 cents/kWh. However, projects can qualify for the full tax credit if they ensure that all laborers and mechanics involved in the construction of the project or the maintenance of the project for the entire 10-year PTC period are paid wages at rates not less than prevailing wages. Projects must also ensure that a percentage of total labor hours are performed by qualified apprentices. The percent of hours increases over time to a maximum requirement of 15% in 2024 and thereafter. Note, projects that commence construction on or after January 1, 2025 can receive a tax credit under the new Clean Energy Production Tax Credit (45Y) described below. 

Bonus Credits

The Domestic Content Bonus increases the credit amount by 10% for projects in which 100% of any steel or iron that is a component of the facility and 40% of the manufactured products that are components of the facility were produced in the United States. Note, the required percentage of domestic manufactured products for offshore wind facilities is 20%. 

The Energy Community Bonus increases the credit amount by 10% for projects that are located at one of the following: (i) a brownfield site, (ii) a metropolitan or non-metropolitan statistical area which (A) has (or, at any time during the period beginning after December 31, 2009, had) 0.17% or greater direct employment or 25% or greater local tax revenues related to the extraction, processing, transport, or storage of coal, oil, or natural gas, or (B) has an unemployment rate above the national average for the previous year, or (iii) a census tract or a census tract that is adjoining a census tract in which a coal mine has closed after 1999 or a coal-fired electric generating unit was retired after 2009. 

Credit Monetization

Section 13801 of The Inflation Reduction Act of 2022 also established procedures for other parties to monetize certain tax credits, including this one, for equipment placed in service on or after January 1, 2023 and through December 31, 2032. 

The direct pay option allows non-taxable entities to directly monetize certain tax credits. The provisions apply to nonprofits, a state or political subdivision thereof, the Tennessee Valley Authority, Indian tribal governments (as defined in Section 30D(g)(9)), any Alaska Native Corporation (as defined in Section 3 of the Alaska Native Claims Settlement Act), or any corporation operating on a cooperative basis which is engaged in furnishing electric energy to persons in rural areas. Such applicable entities can elect to be treated as having made a tax payment equal to the value of the tax credit they would otherwise be eligible to claim. The entity can then claim a refund for the excess taxes they are deemed to have paid. The option effectively makes this tax credit refundable for these entities. 

The act also allows eligible taxpayers to transfer all or a portion of their eligible tax credits to an unrelated taxpayer. Transfers must be reported to IRS and only one transfer is permitted. Must be elected no later than the due date for tax filing for the tax year the tax credit is claimed.

Clean Energy Production Tax Credit (45Y)

Section 13701 of the Inflation Reduction Act created a new tax credit, the Clean Energy Production Tax Credit to replace the traditional PTC for systems placed in service on or after January 1, 2025. The tax credit is functionally similar to the PTC, but is not technology-specific. It applies to all generation facilities that have an anticipated greenhouse gas emissions rate of zero. The credit amount is generally calculated in the same manner as described above, and all technologies that satisfy the labor requirements will be eligible for the full value of the tax credit as adjusted for inflation. The credit will be phased out as the U.S. meets greenhouse gas emission reduction targets. For a project whose construction is commenced in the year following the year in which greenhouse gas emissions from the production of electricity in the United States are equal to or less than 25% of the 2022 levels, the tax credit will not be reduced. However, for projects commenced in the second year following the target being met, the tax credit will be worth 75% of what it would otherwise be. Projects commenced in the third year will receive a credit worth 50%, and all projects commenced after then will not be eligible for a tax credit. 

Homeowners can take advantage of energy efficient mortgages (EEM) to either finance energy efficiency improvements to existing homes, including renewable energy technologies, or to increase their home buying power with the purchase of a new energy efficient home. The U.S. federal government supports these loans by insuring them through Federal Housing Authority (FHA) or Veterans Affairs (VA) programs. This allows borrowers who might otherwise be denied loans to pursue energy efficiency, and it secures lenders against loan default.

FHA Energy Efficient Mortgages
The FHA allows lenders to add up to 100% of energy efficiency improvements to an existing mortgage loan with certain restrictions. FHA mortgage limits vary by county, state and the number of units in a dwelling. See their website for more details. These mortgages were previously limited to $8,000.The maximum amount of the portion of an energy efficient mortgage allowed for energy improvements is now the lesser of 5% of:

• The value of the property,
• 115% of the median area price of a single-family dwelling, or
• 150% of the Freddie Mac conforming loan limit

Loan amounts may not exceed the projected savings of the energy efficiency improvements. These loans may be combined with FHA 203 (h) mortgages available to victims of presidentially-declared disasters and with financing offered through the FHA 203 (k) rehabilitation program. FHA loan limits do not apply to the EEM. Borrowers must obtain a home energy assessment by a qualified energy rater, assessor, or auditor using whole-assessment standards, protocols, and procedures. 

Borrowers may include closing costs and the up-front mortgage insurance premium in the total cost of the loan. The loan is available to anyone who meets the income requirements for FHA’s Section 203 (b), provided the applicant can meet the monthly mortgage payments. New and existing owner-occupied homes of up to two units qualify for this loan. Cooperative units are not eligible. Homebuyers should submit applications to their local HUD Field Office through an FHA-approved lending institution.

Department of Veterans Affairs (VA) Energy Efficient Mortgages
The VA insures EEMs to be used in conjunction with VA loans either for the purchase of existing homes or for refinancing loans secured by the dwelling. Homebuyers may borrow up to $3,000 if only documentation of improvement costs or contractor bids is submitted, or up to $6,000 if the projected energy savings are greater than the increase in mortgage payments. Loans may exceed this amount at the discretion of the VA. Applicants may not include the cost of their own labor in the total amount. No additional home appraisal is needed, but applicants must submit a HER, contractor bids and certain other documentation. The VA insures 50% of the loan if taken by itself, but it may insure less if the total value of the mortgage exceeds a certain amount.

This mortgage is available to qualified military personnel, reservists and veterans. Applicants should secure a certificate of eligibility from their local lending office and submit it to a VA-approved private lender. If the loan is approved, the VA guarantees the loan when it is closed.

Conventional EEMs
Conventional mortgages are not backed by a federal agency. Private lenders sell loans to Fannie Mae and Freddie Mac, which in turn allows homebuyers to borrow up to 15% of an existing home’s appraised value for improvements documented by a HER.

Fannie Mae also lends up to 5% for Energy Star new homes. Fannie Mae EEMs are available to single-family, owner-occupied units, and Fannie Mae provides EEMs to those whose income might otherwise disqualify them from receiving the loans by allowing approved lenders to adjust borrowers’ debt-to-income ratio by 2%. The value of the improvements is immediately added to the total appraised value of the home.

Freddie Mac offers GreenChOICE mortgages to "provide greater affordability for borrowers, offer more flexibility and combine the flexibilities of Home Possible Mortgages to offer borrowers additional affordable financing opportunities." Borrowers should apply directly to the lender. Click here for more details.

ENERGY STAR Partnership for Lenders
To promote EEMs and lenders who offer them, the federal ENERGY STAR program offers a partnership program for lenders who provide EEMs to borrowers. Becoming a partner allows lenders to utilize the Energy Star brand to promote themselves as Energy Star partners offering EEMs. To become a lender, partner lenders must first provide proof that they know how to write EEMs. To maintain their partnership benefits, lenders must write a certain number of EEMs per year. Energy Star does not have a lender certification program or process. Click here for more information about ENERGY STAR's lender partnership program, and here to access the partner locator tool. ENERGY STAR requires that its lender partners provide EEMs to qualified borrowers regardless of whether it is an FHA EEM, Fannie Mae EEM, or VA EEM.

Note: The U.S. Department of Agriculture's Rural Development issues periodic Notices of Solicitation of Applications for the Rural Energy for America Program (REAP) in the Federal Register. The FY 2018 solicitation for the REAP program includes a total budget of approximately $800 million. 

The Rural Energy for America Program (REAP) provides financial assistance to agricultural producers and rural small businesses in America to purchase, install, and construct renewable energy systems, make energy efficiency improvements to non-residential buildings and facilities, use renewable technologies that reduce energy consumption, and participate in energy audits and renewable energy development assistance.

Renewable energy projects for the Renewable Energy Systems and Energy Efficiency Improvement Guaranteed Loan and Grant Program include wind, solar, biomass and geothermal, and hydrogen derived from biomass or water using wind, solar, or geothermal energy sources. These grants are limited to 25% of a proposed project's cost, and a loan guarantee may not exceed $25 million. The combined amount of a grant and loan guarantee must be at least $5,000 (with the grant portion at least $1,500) and may not exceed 75% of the project’s cost. In general, a minimum of 20% of the funds available for these incentives will be dedicated to grants of $20,000 or less. For more information on grant, loan guarantees, loan financing, and opportunities for combinations thereof, visit the USDA website. 

Application due dates are published annually in the Notice of Funding Availability. 

Eligibility

Grants and Guaranteed Loans are generally available to small businesses and agricultural producers and other entities as determined by USDA. To be eligible for REAP grants and guaranteed loans, applicants must demonstrate sufficient revenue to cover any operations and maintenance expense as well as any applicable debt service of the project for the duration of the guaranteed loan or grant. Rural small businesses must be located in rural areas, but agricultural producers may be located in non-rural areas.

Eligible project costs include purchasing energy efficiency improvements or a renewable energy system, energy audits or assessments, permitting and licensing fees, and business plans and retrofitting. For new construction the replacement of older equipment with more efficient equipment may be eligible as a project cost only when a new facility is planned to be more efficient and similarly sized than the older facility. Working capital and land acquisition are only eligible for loan guarantees.

For more information regarding applicant and project eligibility for loans and grants, visit the USDA REAP eligibility webpage, read the eligibility requirements in the most recent Solicitation of Applications for REAP funding in the Federal Registry, and/or contact your state rural energy coordinator.

Regional rural energy coordinators provide loan and grant applications upon request.

History

The Food, Conservation, and Energy Act of 2008 (H.R. 2419), enacted by Congress in May 2008, converted the federal Renewable Energy Systems and Energy Efficiency Improvements Program,* into the Rural Energy for America Program (REAP). Similar to its predecessor, the REAP promotes energy efficiency and renewable energy for agricultural producers and rural small businesses through the use of (1) grants and loan guarantees for energy efficiency improvements and renewable energy systems, and (2) grants for energy audits and renewable energy development assistance. Congress has allocated funding for the new program in the following amounts: $55 million for FY 2009, $60 million for FY 2010, $70 million for FY 2011, and $70 million for FY 2012. REAP is administered by the U.S. Department of Agriculture (USDA). In addition to these mandatory funding levels, up to $25 million in discretionary funding may be issued each year. The American Taxpayer Relief Act of 2012 (H.R. 8) extended discretionary funding for FY 2013. The 2014 Farm Bill reauthorized the USDA to offer these programs and removed the mandate to offer grants for feasibility studies.

* The Renewable Energy Systems and Energy Efficiency Improvements Program was created by the USDA pursuant to Section 9006 of the 2002 federal Farm Security and Rural Investment Act of 2002. Funding in the amount of $23 million per year was appropriated for each fiscal year from FY 2003-2007. In March 2008, the USDA announced that it would accept $220.9 million in applications for grants, loan guarantees, and loan/grant combination packages under the Renewable Energy Systems and Energy Efficiency Improvements Program. The application deadline was June 16, 2008.

Land grant colleges and universities are referred to in the summary table as "schools" and "institutional" eligible sectors. K-12 schools are not eligible for this grant.

The U.S. Department of Energy's (DOE) Office of Indian Energy Policy and Programs promotes tribal energy sufficiency, economic growth, and employment on tribal lands through the development of renewable energy and energy efficiency technologies. The program provides financial assistance, technical assistance, and education and training to tribes for the evaluation and development of renewable energy resources and energy efficiency measures.

DOE's program offerings consist of program management through DOE headquarters, program implementation and project management through DOE's field offices, and technical support through DOE laboratories. Program management is carried out by DOE's Weatherization and Intergovernmental Program, which provides programmatic direction and funding to DOE field offices for program implementation. DOE's Golden Field Office solicits, awards, administers, and manages financial assistance agreements.

Program funding is awarded through a competitive process. Click here to view current program funding opportunities, and here to apply for technical assistance.

Note: Section 13302 of The Inflation Reduction Act of 2022 (H.R. 5376) extended the expiration date and modified the phase down of this tax credit. It also made stand-alone energy storage systems eligible for the credit, and biomass heaters ineligible for the credit. Biomass heaters are now eligible for the residential energy efficiency tax credit. The summary below reflects the credit after the enactment of H.R. 5376.

A taxpayer may claim a credit for a system that serves a dwelling unit located in the United States that is owned and used as a residence by the taxpayer. Expenditures with respect to the equipment are treated as made when the installation is completed. If the installation is at a new home, the "placed in service" date is the date of occupancy by the homeowner. Expenditures include labor costs for on-site preparation, assembly or original system installation, and for piping or wiring to interconnect a system to the home. If the federal tax credit exceeds tax liability, the excess amount may be carried forward to the succeeding taxable year. The maximum allowable credit, equipment requirements and other details vary by technology, as outlined below.

Solar-electric property

• 30% for systems placed in service by 12/31/2019
• 26% for systems placed in service after 12/31/2019 and before 01/01/2022
• 30% for systems placed in service after 12/31/2021 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• There is no maximum credit for systems placed in service after 2008.
• Systems must be placed in service on or after January 1, 2006, and on or before December 31, 2034.
• The home served by the system does not have to be the taxpayer’s principal residence.

Solar water-heating property

• 30% for systems placed in service by 12/31/2019
• 26% for systems placed in service after 12/31/2019 and before 01/01/2022
• 30% for systems placed in service after 12/31/2021 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• There is no maximum credit for systems placed in service after 2008.
• Systems must be placed in service on or after January 1, 2006, and on or before December 31, 2034.
• Equipment must be certified for performance by the Solar Rating Certification Corporation (SRCC) or a comparable entity endorsed by the government of the state in which the property is installed.
• At least half the energy used to heat the dwelling's water must be from solar in order for the solar water-heating property expenditures to be eligible.
• The tax credit does not apply to solar water-heating property for swimming pools or hot tubs.
• The home served by the system does not have to be the taxpayer’s principal residence.

Fuel cell property

• 30% for systems placed in service by 12/31/2019
• 26% for systems placed in service after 12/31/2019 and before 01/01/2022
• 30% for systems placed in service after 12/31/2021 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• Systems must be placed in service on or after January 1, 2006, and on or before December 31, 2034.
• The maximum credit is $500 per half kilowatt (kW).
• The fuel cell must have a nameplate capacity of at least 0.5 kW of electricity using an electrochemical process and an electricity-only generation efficiency greater than 30%.
• In case of joint occupancy, the maximum qualifying costs that can be taken into account by all occupants for figuring the credit is $1,667 per 0.5 kW. This does not apply to married individuals filing a joint return. The credit that may be claimed by each individual is proportional to the costs he or she paid.
• The home served by the system must be the taxpayer’s principal residence.

Small wind-energy property

• 30% for systems placed in service by 12/31/2019
• 26% for systems placed in service after 12/31/2019 and before 01/01/2022
• 30% for systems placed in service after 12/31/2021 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• There is no maximum credit for systems placed in service after 2008.
• Systems must be placed in service on or after January 1, 2006, and on or before December 31, 2034.
• The home served by the system does not have to be the taxpayer’s principal residence.

Geothermal heat pumps

• 30% for systems placed in service by 12/31/2019
• 26% for systems placed in service after 12/31/2019 and before 01/01/2022
• 30% for systems placed in service after 12/31/2021 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• There is no maximum credit for systems placed in service after 2008.
• Systems must be placed in service on or after January 1, 2006, and on or before December 31, 2034.
• The geothermal heat pump must meet federal Energy Star criteria.
• The home served by the system does not have to be the taxpayer’s principal residence

Battery Storage Systems (Standalone Systems)

• 0% for systems placed in service before 1/1/2023
• 30% for systems placed in service after 12/31/2022 and before 01/01/2033
• 26% for systems placed in service after 12/31/2032 and before 01/01/2034
• 22% for systems placed in service after 12/31/2033 and before 01/01/2035
• The system must have a capacity of at least 3 kilowatt hours
• The home served by the system does not have to be the taxpayer’s principal residence.

Significantly, The American Recovery and Reinvestment Act of 2009 repealed a previous limitation on the use of the credit for eligible projects also supported by "subsidized energy financing." For projects placed in service after December 31, 2008, this limitation no longer applies.

Energy Storage

Prior to the enactment of the Inflation Reduction Act of 2022, the federal tax code did not explicitly reference energy storage, so stand-alone energy storage systems did not qualify for the tax credit.  However, the IRS issued Private Letter Rulings in 2013 and 2018, which address energy storage paired with PV systems. In both cases, the IRS ruled that the energy storage equipment when paired with PV met the statutory definition of a "qualified solar electric property expenditure," as was eligible for the tax credit. It is important to note that Private Letter Rulings only apply to the taxpayer who requested it, and do not establish precedent. Any taxpayer considering the purchase of an energy storage system should consult their accountant or other tax professional before claiming a tax credit.  

History

Established by The Energy Policy Act of 2005, the federal tax credit for residential energy property initially applied to solar-electric systems, solar water heating systems and fuel cells. The Energy Improvement and Extension Act of 2008 extended the tax credit to small wind-energy systems and geothermal heat pumps, effective January 1, 2008. Other key revisions included an eight-year extension of the credit to December 31, 2016; the ability to take the credit against the alternative minimum tax; and the removal of the $2,000 credit limit for solar-electric systems beginning in 2009. The credit was further enhanced in February 2009 by The American Recovery and Reinvestment Act of 2009, which removed the maximum credit amount for all eligible technologies (except fuel cells) placed in service after 2008.

Note: The Tax Cuts and Jobs Act of 2017 repealed section 54C of the Internal Revenue Code, which authorized the use of New CREBs. IRS Notice 2018-15  announced that the IRS will no longer process applications for or issue allocations of New CREBs. The summary below describes CREBs before they were repealed, and is here for historical purposes only. 

Clean renewable energy bonds (CREBs) may be used by certain entities -- primarily in the public sector -- to finance renewable energy projects. The list of qualifying technologies is generally the same as that used for the federal renewable energy production tax credit (PTC). CREBs may be issued by electric cooperatives, government entities (states, cities, counties, territories, Indian tribal governments or any political subdivision thereof), and by certain lenders.  The bondholder receives federal tax credits in lieu of a portion of the traditional bond interest, resulting in a lower effective interest rate for the borrower.* The issuer remains responsible for repaying the principal on the bond.

The Energy Improvement and Extension Act of 2008 (Div. A, Sec. 107) allocated $800 million for new Clean Renewable Energy Bonds (CREBs). In February 2009, the American Recovery and Reinvestment Act of 2009 (Div. B, Sec. 1111) allocated an additional $1.6 billion for New CREBs, for a total New CREB allocation of $2.4 billion. The Energy Improvement and Extension Act of 2008 also extended the deadline for previously reserved allocations ("Old CREBs") until December 31, 2009, and addressed several provisions in the existing law that previously limited the usefulness of the program for some projects. A separate section of the law extended CREBs eligibility to marine energy and hydrokinetic power projects.

Participation in the program is limited by the volume of bonds allocated by Congress for the program. Participants must first apply to the Internal Revenue Service (IRS) for a CREBs allocation, and then issue the bonds within a specified time period. The New CREBs allocation totaling $2.4 billion does not have a defined expiration date under the law; however, recent IRS solicitations for new applications require the bonds to be issued within 3 years after the applicant receives notification of an approved allocation (see History section below for information on previous allocations). Public power providers, governmental bodies, and electric cooperatives are each reserved an equal share (33.3%) of the New CREBs allocation. IRS Notice 2015-12, however, divided the remaining volume cap differently: $516,565,691.35 for public power providers, $597,134,963.60 for governmental bodies, and $280,778,469.00 for cooperative utilities.

The tax credit rate is set daily by the U.S. Treasury Department. Under past allocations, the credit could be taken quarterly on a dollar-for-dollar basis to offset the tax liability of the bondholder. However, under the new CREBs allocation, the credit has been reduced to 70% of what it would have been otherwise. Other important changes are described in IRS Notice 2009-33.

CREBs differ from traditional tax-exempt bonds in that the tax credits issued through CREBs are treated as taxable income for the bondholder. The tax credit may be taken each year the bondholder has a tax liability as long as the credit amount does not exceed the limits established by the federal Energy Policy Act of 2005. Treasury rates for prior CREB allocations, or "Old" CREBs are available here, while rates for New CREBs and other qualified tax credit bonds are available here.

In April 2009, the IRS issued Notice 2009-33, which solicited applications for the New CREB allocation and provided interim guidance on certain program rules and changes from prior CREB allocations. The expiration date for New CREB applications under this solicitation was August 4, 2009. Further guidance on CREBs is available in IRS Notices 2006-7 and 2007-26 to the extent that the program rules were not modified by 2008 and 2009 legislation. In October 2009, the Department of Treasury announced the allocation of $2.2 billion in new CREBs for 805 projects across the country. A new solicitation (IRS Announcement 2010-54) was issued in September 2010 for roughly $191 million in unallocated New CREB bond volume available only to electric cooperatives. The award announcement for this allocation was made in March 2011. It remains to be seen if or when the IRS will issue new funding announcements for Old CREB allocations which were not issued by the December 31, 2009 deadline, or New CREB allocations which miss the three-year issuance period.

History
The federal Energy Policy Act of 2005 (EPAct 2005) established Clean Energy Renewable Bonds (CREBs) as a financing mechanism for public sector renewable energy projects. This legislation originally allocated $800 million of tax credit bonds to be issued between January 1, 2006, and December 31, 2007. Following the enactment of the federal Tax Relief and Health Care Act of 2006, the IRS made an additional $400 million in CREBs financing available for 2008 through Notice 2007-26.

In November 2006, the IRS announced that the original $800 million allocation had been reserved for a total of 610 projects. The additional $400 million (plus surrendered volume from the previous allocation) was allocated to 312 projects in February 2008. Of the $1.2 billion total of tax-credit bond volume cap allocated to fund renewable-energy projects, state and local government borrowers were limited to $750 million of the volume cap, with the rest reserved for qualified municipal or cooperative electric companies.

For further information on CREBs, contact Zoran Stojanovic or Timothy Jones of the IRS Office of Associate Chief Counsel at (202) 622-3980. Questions on recent IRS Notice 2009-33 can be directed to Janae Lemley at (636) 255-1202.


*In March 2010 Congress enacted H.R. 2847 (Sec. 301) permitting New CREB issuers to make an irrevocable election to receive a direct payment -- a refundable tax credit -- from the Department of Treasury equivalent to and in lieu of the amount of the non-refundable tax credit which would otherwise be provided to the bondholder. This option only applies to New CREBs issued after the March 18, 2010 enactment of the law. In April 2010 the IRS issued Notice 2010-35 providing guidance on the direct payment option.

The Rural Energy for America Program (REAP) provides financial assistance to agricultural producers and rural small businesses in rural America to purchase, install, and construct renewable energy systems, make energy efficiency improvements to non-residential buildings and facilities, use renewable technologies that reduce energy consumption, and participate in energy audits and renewable energy development assistance.

Renewable energy projects for the Renewable Energy Systems and Energy Efficiency Improvement Guaranteed Loan and Grant Program include wind, solar, biomass and geothermal, and hydrogen derived from biomass or water using wind, solar, or geothermal energy sources. These grants are limited to 25% of a proposed project's cost, and a loan guarantee may not exceed $25 million. The combined amount of a grant and loan guarantee must be at least $5,000 (with the grant portion at least $1,500) and may not exceed 75% of the project’s cost. In general, a minimum of 20% of the funds available for these incentives will be dedicated to grants of $20,000 or less. For more information on grant, loan guarantees, loan financing, and opportunities for combinations thereof, visit the USDA website.

Application due dates are published annually in the Notice of Funding Availability.

Eligibility

Grants and Guaranteed Loans are generally available to small businesses and agricultural producers and other entities as determined by USDA. To be eligible for REAP grants and guaranteed loans, applicants must demonstrate sufficient revenue to cover any operations and maintenance expense as well as any applicable debt service of the project for the duration of the guaranteed loan or grant. Rural small businesses must be located in rural areas, but agricultural producers may be located in non-rural areas.

Eligible project costs include purchasing energy efficiency improvements or a renewable energy system, energy audits or assessments, permitting and licensing fees, and business plans and retrofitting. For new construction the replacement of older equipment with more efficient equipment may be eligible as a project cost only when a new facility is planned to be more efficient and similarly sized than the older facility. Working capital and land acquisition are only eligible for loan guarantees.

For more information regarding applicant and project eligibility for loans and grants, visit the USDA REAP eligibility webpage, read the eligibility requirements in the most recent Solicitation of Applications for REAP funding in the Federal Registry, and/or contact your state rural energy coordinator.

Regional rural energy coordinators provide loan and grant applications upon request.

History

The Food, Conservation, and Energy Act of 2008 (H.R. 2419), enacted by Congress in May 2008, converted the federal Renewable Energy Systems and Energy Efficiency Improvements Program,* into the Rural Energy for America Program (REAP). Similar to its predecessor, the REAP promotes energy efficiency and renewable energy for agricultural producers and rural small businesses through the use of (1) grants and loan guarantees for energy efficiency improvements and renewable energy systems, and (2) grants for energy audits and renewable energy development assistance. Congress has allocated funding for the new program in the following amounts: $55 million for FY 2009, $60 million for FY 2010, $70 million for FY 2011, and $70 million for FY 2012. REAP is administered by the U.S. Department of Agriculture (USDA). In addition to these mandatory funding levels, up to $25 million in discretionary funding may be issued each year. The American Taxpayer Relief Act of 2012 (H.R. 8) extended discretionary funding for FY 2013. The 2014 Farm Bill reauthorized the USDA to offer these programs and removed the mandate to offer grants for feasibility studies.

* The Renewable Energy Systems and Energy Efficiency Improvements Program was created by the USDA pursuant to Section 9006 of the 2002 federal Farm Security and Rural Investment Act of 2002. Funding in the amount of $23 million per year was appropriated for each fiscal year from FY 2003-2007. In March 2008, the USDA announced that it would accept $220.9 million in applications for grants, loan guarantees, and loan/grant combination packages under the Renewable Energy Systems and Energy Efficiency Improvements Program. The application deadline was June 16, 2008.

Land grant colleges and universities are referred to in the summary as "schools" and "institutional" eligible sectors. K-12 schools are not eligible for this grant.

The City of Cincinnati offers property tax abatements for residential and commercial buildings constructed or renovated to meet LEED certification standards. The original green building tax abatement ordinance was passed in 2006 and has been amended four times since, culminating in the current abatement rules clarifications passed December 19, 2012. The incentive is available for any building within city limits and does not require a demonstration of financial need. The residential designation applies to structures with up to three units and residential condominiums, while residential structures with four or more units are classified as commercial buildings. Industrial structures are also eligible to receive incentives under the commercial program. An agreement must be executed with the Department of Community Development before construction begins. The tax abatement rules for buildings that received permits on or before January 31, 2013 are as follows:

Residential Buildings

• 100% property tax abatement for 15 years (new construction) or 10 years (existing building retrofits) up to $562,792
• Market value limit increases by 3% each year
• No value limitation for structures that achieve LEED Platinum certification
• Minimum investment of $2,500 for one- and two-unit structures (new construction or rehab) and a minimum investment of $5,000 for 3-unit structures is required.

Commercial and Industrial

• 100% tax abatement (before payment in lieu of taxes) for 15 years (new construction) or 12 years (existing building renovations)
• No cap on the value of improvements
• Requires an agreement signed prior to the start of construction that must be approved by the City Council
• Owner must enter into an agreement with the local Board of Education district to pay the board an amount equal to 25% of the avoided property taxes, effectively making the tax abatement 75%.
• Application fee of $750 to the State of Ohio, plus an annual fee amounting to 1% of the value of the tax abatement with a minimum of $500 and a maximum of $2,500.

Tax abatements for buildings that received permits after January 31, 2013 are as follows:

Residential Buildings

• 100% property tax abatement for 15 years (new construction) or 10 years (existing building retrofits) up to $275,000 for Non-LEED certified and LEED-certified buildings; $400,000 for LEED Silver buildings; and $562,000 for LEED Gold buildings
• No value limitation for structures that achieve LEED Platinum certification
• Minimum investment of $2,500 for one- and two-unit structures (new construction or rehab) and a minimum investment of $5,000 for 3-unit structures is required.

Commercial and Industrial

• 100% tax abatement (before payment in lieu of taxes) for 8-15 years; see below chart
• No cap on the value of improvements, except multi-unit (4 or more) residential buildings are limited to $275,000 per dwelling unit
• Requires an agreement signed prior to the start of construction that must be approved by the City Council
• Owner must enter into an agreement with the local Board of Education district to pay the board an amount equal to 25% of the avoided property taxes, effectively making the tax abatement 75%.
• Application fee of $750 to the State of Ohio, plus an annual fee amounting to 1% of the value of the tax abatement with a minimum of $500 and a maximum of $2,500.
• Additional provisions apply to commercial buildings using Community Reinvestment Area LEED abatements.

The duration of the commercial tax abatement varies by certification level and type of building and improvements, per the chart below:

Note: The Tax Cuts and Jobs Act (HR 1) of 2017 repealed the use of tax credit bonds effective January 1, 2018.  Issuers of QECBs that elected to receive direct payments from the Treasury issued on or before December 31, 2017, consistent with the Internal Revenue Code (Section 54D), will continue to receive direct payments. The summary presented below is for historical purposes. 

The Energy Improvement and Extension Act of 2008, enacted in October 2008, authorized the issuance of Qualified Energy Conservation Bonds (QECBs) that may be used by state, local and tribal governments to finance certain types of energy projects. QECBs are qualified tax credit bonds, and in this respect are similar to new Clean Renewable Energy Bonds or CREBs. The October 2008 enabling legislation set a limit of $800 million on the volume of energy conservation tax credit bonds that may be issued by state and local governments. The American Recovery and Reinvestment Act of 2009, enacted in February 2009, expanded the allowable bond volume to $3.2 billion. In April 2009, the IRS issued Notice 2009-29 providing interim guidance on how the program will operate and how the bond volume will be allocated. Subsequently, H.R. 2847 enacted in March 2010 introduced an option allowing issuers of QECBs and New CREBs to recoup part of the interest they pay on a qualified bond through a direct subsidy from the Department of Treasury. Guidance from the IRS on this option was issued in April 2010 under Notice 2010-35.

With tax credit bonds, generally the borrower who issues the bond pays back only the principal of the bond, and the bondholder receives federal tax credits in lieu of the traditional bond interest. The tax credit may be taken quarterly to offset the tax liability of the bondholder. The tax credit rate is set daily by the U.S. Treasury Department; however, energy conservation bondholders will receive only 70% of the full rate set by the Treasury Department under 26 USC § 54A. QECB rates are available here. Credits exceeding a bondholder's tax liability may be carried forward to the succeeding tax year, but cannot be refunded. Energy conservation bonds differ from traditional tax-exempt bonds in that the tax credits issued through the program are treated as taxable income for the bondholder.

For QECBs issued after March 18, 2010, the bond issuer may make an irrevocable election to receive a direct payment from the Department of Treasury equivalent to the amount of the non-refundable tax credit described above, which would otherwise accrue to the bondholder. The direct payment comes in the form of a refundable tax credit to the issuer in lieu of a tax credit to the bondholder. This option was formerly limited to Build America Bonds (see 26 USC § 6431, H.R. 2847 and IRS Notice 2010-35 for details). The advantage of either option is that it creates a lower effective interest rate for the issuer because the federal government subsidizes a portion of the interest costs.

In contrast to CREBs, QECBs are not subject to a U.S. Department of Treasury application and approval process. Bond volume is instead allocated to each state based on the state's percentage of the U.S. population as of July 1, 2008. Each state is then required to allocate a portion of its allocation to "large local governments" within the state based on the local government's percentage of the state's population. Large local governments are defined as municipalities and counties with populations of 100,000 or more. Large local governments may reallocate their designated portion back to the state if they choose to do so. IRS Notice 2009-29 contains a list of the QECB allocations for each state and U.S. territory. Implementing allocations and reallocations most often, but not always, takes place through State Energy Offices. As of this writing some states have yet to assign implementation responsibilities to a specific state agency.

The definition of "qualified energy conservation projects" is fairly broad and contains elements relating to energy efficiency capital expenditures in public buildings that reduce energy consumption by at least 20%; green community programs (including loans and grants to implement such programs); renewable energy production; various research and development applications; mass commuting facilities that reduce energy consumption; several types of energy related demonstration projects; and public energy efficiency education campaigns. In July 2012 the IRS issued Notice 2012-44 clarifying the meaning of "capital expenditures" and "green community program", and providing guidance on meeting the 20% energy consumption reduction requirement for energy -efficiency related capital expenditures in publicly-owned buildings (see 26 USC § 54D and IRS Notice 2012-44 for additional details). Renewable energy facilities that are eligible for CREBs are also eligible for QECBs.

This bond-funded program creates an Advanced Energy Job Stimulus Fund that is administered through a public process previously managed by the Ohio Air Quality Development Authority (OAQDA). Beginning in 2012, the program is managed by the Ohio Development Services Agency. The Program will award funds to a portfolio of advanced energy projects. These projects will serve to attract new investment to Ohio, build upon Ohio's manufacturing strength, advance energy technology development toward commercialization and prepare Ohio's workforce for the future. Detailed definitions of eligible advanced energy projects and renewable energy resources may be found in ORC 3706.25.

House Bill 166 renewed the Advanced Energy Job Stimulus program to be funded by the Advanced Energy Job Fund, effective July 18, 2019. 

Funding Categories
The $150 million advanced energy money (over three years) seeks to increase the development, production and use of advanced energy technologies in the state, and is divided in the following manner:
• $66 million for clean coal technology projects administered through OAQDA’s Ohio Coal Development Office (OCDO) (reviewed by the Technical Advisory Committee and approved by OAQDA); and
• $84 million for non-coal-related projects in three $28 million annual appropriations administered by OAQDA (reviewed by the Development Finance Advisory Council, approved by the OAQDA and brought before Controlling Board for final approval).

Project Financing
OAQDA provides financing via conduit bonds for a broad range of projects involving the purchase, construction and/or installation of air quality facilities by businesses and other entities. It is important to note that this program provides forgivable and non-forgivable loans ONLY. The Ohio Constitution does not allow grant awards for this program. All OAQDA financing instruments are conduit bonds that:
• May be exempt or non-exempt from federal income tax.
• Enjoy 100 percent lifetime exemption from state income tax, real property, sales and use taxes.
• Are based on a credit analysis of the benefiting party and must identify the revenue sources that cover principal and interest payment.

As a general guideline, awards will range from approximately $50,000 to $2 million, based on size and scope and on jobs, investments and other impacts and may be considered for higher awards if outstanding potential value is demonstrated. Additionally, five percent of the fund may be set aside for small awards (generally in the range of $50,000) to support disruptive technologies with significant potential for success, even if they are in earlier stages of development. For more information about OAQDA project financing, please visit the OAQDA web site.

For highly qualified applicants, loans could be structured a number of ways including below market rates, subordinate collateralized positions with participating financial institutions and/or varying principal payments for a specified period of time. It should be noted that projects receiving assistance through this program may be subject to Ohio prevailing wage requirements. Applicants should review these guidelines carefully.

The Home Improvement Program (HIP) in Hamilton County, Ohio, originally opened in 2002, and was reinstated in May 2008. The HIP loan allows homeowners in Hamilton County communities to borrow money to repair or remodel homes or rental property at interest rates 3% below the lowest rate a bank would normally offer. The following banks participate: Fifth Third Bank, U.S. Bank, KeyBank, North Side Bank and First Safety Bank. The HIP loan is usually structured as a home equity loan, secured by a second mortgage on the property. Credit requirements apply.

Eligible residential (one- or two-family homes) and commercial properties must have an assessed value of less than $350,000 and must be current on property tax payments. There is no property value limit on multi-family dwellings (three or more units). Loans may be used for alteration, repair, maintenance or improvements, including renewable energy and energy efficiency improvements, although funds may not be used for luxury projects (e.g., swimming pools, hot tubs) or for free-standing appliances. Appliances that are permanently installed are permissible.

Note: In 2010, the Federal Housing Finance Agency (FHFA), which has authority over mortgage underwriters Fannie Mae and Freddie Mac, directed these enterprises against purchasing mortgages of homes with a PACE lien due to its senior status above a mortgage. Most residential PACE activity subsided following this directive; however, some residential PACE programs are now operating with loan loss reserve funds, appropriate disclosures, or other protections meant to address FHFA's concerns. Commercial PACE programs were not directly affected by FHFA’s actions, as Fannie Mae and Freddie Mac do not underwrite commercial mortgages. Visit PACENow for more information about PACE financing, and for a comprehensive list of all PACE programs across the country.

Property-Assessed Clean Energy (PACE) financing effectively allows property owners to borrow money to pay for energy improvements. The amount borrowed is typically repaid via a special assessment on the property over a period of years. Ohio has authorized certain local governments to establish such programs, as described below. (Not all local governments in Ohio offer PACE financing; contact your local government to find out if it has established a PACE financing program.

Ohio PACE Programs

To be eligible for PACE financing, a local program at the city or county level must be available in your area. Jurisdictional eligibility rules vary by county and municipality; municipalities in an eligible county are not automatically eligible for PACE financing.

Examples of active local PACE programs in Ohio include:

• BetterBuildings Northwest Ohio – Administered by Toledo-Lucas County Port Authority
• Cincinnati PACE – Administered by the Greater Cincinnati Energy Alliance
• Lake County PACE – Administered by the Lake County Port & Economic Development Authority
• Northeast Ohio Advanced Energy District - The City of Cleveland in partnership with the First Suburbs Development Council has announced the creation of the Advanced Energy Special Improvement District and commercial loans for energy improvements
• The City of Toledo has created a SID in collaboration with the Northwest Ohio Bond Fund in order to finance energy efficiency improvements.
• Columbus-Franklin County Finance Authority

Program Provisions

Legislation enacted in Ohio in July 2009 (HB 1) expanded the state's existing special improvement district law by authorizing local municipalities and townships to create special energy improvement districts that offer property owners financing to install photovoltaic (PV) or solar-thermal systems on real property. In June 2010, legislation (S.B. 232*) provided additional authorization to municipalities to allow for financing of geothermal, customer-generated systems (including wind, biomass, and gasification systems 250 kW and below; or 250 kW and above as long as they serve all or part of the owner's on-site load) and energy efficiency improvements that are permanently fixed to the property within a special energy improvement district.

Any municipality choosing to establish a Special Energy Improvement District (SID) is authorized by law to issue bonds (either special or general obligation funds) and/or apply for state or federal money in order to fund such programs. Any property owner who opts in to such a program and installs solar, geothermal, wind, biomass, gasification, or energy efficiency improvements permanently affixed to his/her real property using municipal financing must agree to a special assessment on the property tax bill for up to 30 years in order to pay for the financing secured through this mechanism.

Many other provisions are determined locally.

Program Creation

Municipalities and townships interested in creating such districts and providing financing for property owners must circulate a petition for eligible property owners to opt in to the program and the municipality must approve a special energy improvement district via ordinance or resolution. A special improvement district board of directors must be created (if one did not already exist) to implement the program. Each local municipality must determine specific eligibility criteria, the maximum financing amount and interest rates, and other terms. Unlike regular special improvement districts in Ohio, a special energy improvement district does not have to be comprised of contiguous properties.

*In addition, S.B. 232 includes a provision for aggregating renewable energy certificates created by projects within a district. The bill also allows any electricity savings and/or demand reduction resulting from projects within a district to count towards the electric distribution utility's compliance under the Energy Efficiency Resource Standard (22% reduction in electricity use by 2026 and peak demand reduction requirements under Ohio's Revised Code (ORC 4928.66). This would not include any industrial customers who choose to commit its savings to the utility in exchange for an exemption from the utility's energy efficiency cost recovery mechanism, as provided by law. The district would have to report to the utility regarding energy projects implemented in the special energy improvement district on a quarterly basis.

The Energy Conversation for Ohioans (ECO-Link) program offers Ohio homeowners reduced rate financing for energy efficiency and renewable energy home upgrades. Administered by the Ohio Treasury, qualifying homeowners are eligible for a 3% loan rate reduction through participating banks.*

Qualifying Technology
A wide range of energy-efficiency upgrades and certain renewable-energy systems may be undertaken, including:

• Appliances (must meet established efficiency standards)
Battery Chargers, Clothes Washers, Dehumidifiers, Dishwashers, Refrigerators, Freezers, Room Air Conditioners, Room Air Cleaners
• Water Heaters (must meet established efficiency standards)
Gas Condensing, Heat Pump, High-Efficiency Gas Storage, Solar Water Heaters, Whole-Home Gas Tankless
• Heating & Cooling
Air-source Heat Pumps, Boilers, Central Air Conditioners, Ceiling Fans, Dehumidifiers, Furnaces, Geothermal Heat Pumps, Biomass Stove
• Home
Home Sealing, Roof Products, Windows, Doors, and Skylights
• Renewable Energy Systems
Photovoltaic (PV) Systems, Residential Wind Turbines (less than 100 kilowatts)

• MUST be an Ohio resident

• MUST own an existing home or condominium, but additional residential classifications may be eligible

• MUST receive approval for a qualifying loan through a participating bank
• MUST use the loan proceeds for a primary residence on any of the following projects; home improvement/restoration (includes historical retention/restoration, urban development, neighborhood restoration and revitalization), energy efficiency, and others. For additional details please visit the ECO-Link website

Apply for ECO-Link

1. Locate a bank that is currently participating in this Ohio Linked Deposit Program. To do this, start on this website www.tos.ohio.gov/depositorybanks which lists all banks that are qualified to participate in Ohio Linked Deposit Programs. If your preferred bank does not participate in ECO-Link, contact the Economic Development department for help finding a participating bank.
2. Obtain pre-approval for a loan from the participating bank and establish a borrowing rate.
3. Complete an online ECO-Link application, and attach the project quotes/receipts/invoices electronically to the application (if you are unable to access the internet, please work with your lender to fill out your application, and upload the supporting project documentation). The total estimates quotes, and/or receipts submitted for work performed must be greater than or equal to the total value of the loan for which an ECO-Link interest rate reduction is sought.

Note: According to the Ohio Development Services Agency website, the owner or lessee subject to the sale-leaseback transaction must apply to Development Services Agency on or before December 31, 2024, to qualify for this tax credit.

Ohio's Renewable and Advanced Energy Project Property Tax Exemption, enacted with the passage of Ohio S.B. 232 in the summer of 2010, exempts qualified energy projects in Ohio from public utility tangible personal property taxes and real property taxes.

Per Ohio Revision Code 5709.53, qualified energy systems of 250 kilowatts (kW) or less will not be subject to payment in lieu of property tax. For qualified energy projects larger than 250 kW, see the DSIRE entry Qualified Energy Property Tax Exemption for Projects over 250 kW (Payment in Lieu) for additional details.

Energy facilities with a nameplate capacity of 250 kilowatts (kW) or less (AC) are permanently exempt from public utility tangible personal property tax and real property taxes. Energy facilities are defined as interconnected solar, wind, or other tangible property used to generate electricity. Under this law, the interconnection equipment, cables, devices, and the land (limited to up to 1/2 acre per wind turbine) are also exempt. Energy facilities built after January 1, 2010, are eligible for this treatment.

Visit the Ohio Development Services Agency's website for additional information, implementation documents, and program documents.

In lieu of taxes, the following payments must be made to the county where the renewable energy facility is located:

• Solar energy facilities: $7,000 per megawatt (MW)
• All other qualified facilities employing at least 75% Ohio-based employees during construction: $6,000/MW
• All other qualified facilities employing at least 60% Ohio-based employees during construction: $7,000/MW
• All other qualified facilities employing at least 50% Ohio-based employees during construction: $8,000/MW

The property tax exemption must be approved by local county commissioners if the project is 5 MW or larger. Local county commissioners are allowed to require an additional payment as long as the overall payment does not exceed $9,000 per MW. In addition, the law requires that the renewable energy facility 1) meets certain jobs-creation criteria, 2) provides for road repairs (for projects 5 MW or more), 3) provides training and equipment to local first responders (for projects 5 MW or more), 4) establishes partnerships with universities (for projects 2 MW or more), and 5) makes offers to sell the renewable energy credits to Ohio utilities seeking to buy them.

Visit the ODSA web site for additional information, implementation documents, program documents and the application.

*S.B. 232 permanently exempted renewable energy facilities up to and including 250 kW from the public utility tangible personal property tax. See DSIRE entry Qualified Energy Property Tax Exemption for Projects 250 kW or Less for additional details.

NOTE: The most recent solicitation for this program closed July 6, 2021. Please check the program website for information on future solicitations.

The U.S. Department of Agriculture (USDA) offers an ongoing grant program for the improvement of energy generation, transmission, and distribution facilities in rural communities. This program began in 2000. Eligibility is limited to projects in communities that have average home energy costs at least 275% above the national average. Retail power suppliers serving rural areas are eligible to apply for grant funding, including non-profits (cooperatives and limited dividend or mutual associations), commercial entities, state and local governments entities, and tribal governments. Under the most recent solicitation for projects, a total of $7 million was available for qualifying projects. Under this solicitation grants ranging from $100,000 to $3 million were available for a variety of activities, including:

• Electric generation, transmission, and distribution facilities;
• Natural gas or petroleum storage or distribution facilities;
• Renewable energy facilities used for on-grid or off-grid electric power generation, water or space heating, or process heating and power;
• Backup up or emergency power generation or energy storage equipment; and
• Weatherization of residential and community property, or other energy efficiency or conservation programs.

This grant program is not limited to renewable energy or energy conservation and efficiency measures, but these measures are eligible for this grant program.

Note: Check the program website for the most recent Requests for Proposals.

As part of its Electric Security Plan, FirstEnergy will periodically solicit proposals for Renewable Energy Credits (RECs) and Solar Renewable Energy Credits (SRECs). Proposals were accepted for long-term contracts, and the recent short-term contract window has closed. Requests for proposals will not be available at regular intervals; check the program website for current information regarding application due dates. FirstEnergy will not be purchasing energy or energy capacity under this proposal. All application materials are available on the program website, and all applicants must be certified by the Public Utilities Commission of Ohio.

Short-Term Contracts

In the most recent short-term contract procurement, FirstEnergy is seeking to purchase 470,000 RECs (which may include solar and non-solar RECs) from Ohio or states contiguous to Ohio. All SRECs must be created between January 1, 2020 and December 31, 2022.

Note: Loan applications for fiscal year 2023 will be accepted on a first come, first served basis.

The Energy Loan Fund provides low-cost financing for energy efficiency and renewable energy improvements to Ohio-based businesses with less than 500 employees, manufacturers enrolled in the Energy Efficiency Program for Manufacturers, nonprofits, and public entities. For further information regarding eligibility, please view the Program Guidelines.

Loans can range between $250,000 and $2 million depending on the project. Funding is provided through the Ohio Advanced Energy Fund and the Federal State Energy Program.

The applications must demonstrate a minimum 15% reduction in energy use as a result of the project. Other evaluation criteria include the application’s completeness, whether the application meets the requirements of applicable state and/or federal funding sources, the type of eligible technologies utilized and the extent of energy savings achieved as a result of the project, extent of job creation and improvement in environmental quality as a result of the project, extent of match investment in the project, the project readiness and timeline to complete the project by deadline of certain funding sources, applicant’s need for financial assistance to complete the project, and the advancement of the mission of the Office of Energy.

See the website above for complete details and information on where to submit a pre-application.

Compliance goals were revised by House Bill 128 in 2021 that reduced the renewable portfolio requirements of all electric distribution utilities in the state. Section 4928.642 is the revised section and reads as follows.

Beginning with compliance year 2020, the public utilities commission shall, in accordance with this section, reduce the number of kilowatt hours required for compliance with section 4928.64 of the Revised Code for all electric distribution utilities and all electric services companies in this state. The commission shall determine each utility's and each company's reduction by taking the total amount of kilowatt hours produced, if any, by all qualifying renewable resources, as defined in section 3706.40 of the Revised Code, during the preceding compliance year, allocating that total among all electric distribution utilities and electric services companies in proportion to their baselines for the subject compliance year, and subtracting that allocated amount from the utility's or company's compliance amount as otherwise determined under section 4928.64 of the Revised Code.

Solar Renewable Energy Certificates (SRECs) represent the renewable attributes of solar generation, bundled in minimum denominations of one megawatt-hour (MWh) of production. The legislation creating Ohio's AEPS program, (S.B. 221), mandates the creation of SRECs and Solar Alternative Compliance Payments (SACPs). To be in complaince with AEPS, Ohio retail electricity suppliers must either purchase or generate SRECs OR pay a Solar Alternative Compliance Payment (SACP) for any shortfalls in SREC purchases. 

SRECs have a lifetime of five years following their initial acquisition. Generators must register with the Public Utilities Commission of Ohio (PUCO) to become a certified facility, eligible to generate SRECs for compliance under Ohio's Alternative Energy Resource Standard (AERS). Once PUCO certification is received, the generator must also register with an attribute tracking system (such as PJM-GATS or M-RETS). To 

If utilities cannot acquire SRECs, then they are required to pay a Solar Alternative Compliance Payment (SACP) to remain in compliance with Ohio's Alternative Energy Portfolio Standard. SACP prices were initially set at $450/MWh by SB 221 in 2009 and were on schedule to drop by $50 every two years until a $50/MWh minimum was met in 2024. In 2014, SB 310 froze the SACP at $300/MWh for 2014, 2015, and 2016, and stipulated that in 2017 SACPs resume the scheduled fall by $50 every two years to a minimum of $50/MWh by 2025.

Compliance payments are deposited into the Ohio Advanced Energy Fund, which provides financial support to renewable energy and energy efficiency projects within the state. Utilities may not pass along the cost of compliance payments to their customers. PUCO may grant a force majeure determination, thereby relieving the utilities of their obligation to pay SACP, if utilities are able to prove they were unable to procure enough SRECs to satisfy the requirements due to conditions beyond their control. Historically, utilities have generally been able into compliance without paying the ACP.

Interested system owners must reserve a case number on the web site above. For applications received after December 31, 2012, credit will only be given for generation that occurred after the facility's application date.

NOTE: Only multifamily properties are eligible for the program. Single family homeowners are not eligible for this program. 

The Fannie Mae Green Financing Business provides mortgage financing to apartment buildings and cooperatives (with 5 or more units) to finance energy and water efficiency property improvements. Its green financing programs include Green Rewards, and preferential pricing for loans secured by a property with an eligible Green Building Certification. All Fannie Mae green loans are securitized as Green Mortgage Backed Securities (Green MBS). To learn more about these programs, multifamily property owners should coordinate with a Fannie Mae DUS Lender:  https://multifamily.fanniemae.com/about-multifamily/our-partners/dus-lenders

Green Rewards, launched in 2015, provides preferential pricing and up to an additional 5% of loan proceeds by including up to 75% of projected owner energy and water savings and 25% of projected tenant savings in the loan underwriting. Conventional and affordable multifamily properties, as well as cooperatives, seniors, military, and student housing properties are eligible for this program. To qualify for a Green Rewards loan the property owner must commit to making property improvements that are projected to reduce the whole property’s annual energy and water consumption by at least 30%, which a minimum of 15% must be attributable to savings in energy consumption. Properties may be located anywhere in US, and the selected property upgrades must be completed within 12 months of loan closing.

Fannie Mae also provides preferential pricing for an acquisition or refinance loan on a conventional or affordable property that has a current, eligible Green Building Certification per Fannie Mae Form 4250.

Please visit the Fannie Mae Green Financing website for more information and detailed program requirements.